Description
- Pre magnetized magnet for indigo, UV offset and some dry toner.
- 16 mil total thickness and photo quality PP print surface.
- Will stack and cut perfectly on most machines and will not mark after cutting edges.
PRINTING INSTRUCTIONS:
Printing instructions will depend on the machine.
Litho is easy, Indigo is also easy.
The dry toner machines are all over the board.
The Canon machines have the hardest time running pre magnetized because they have a ferrous metal bottom to the fuser drawer and the Ricoh machines and KM are the easiest as they are all plastic and aluminum.
Please advise what machine your customer will be testing.
Below are a few that have been tested using the magnetized (IM-IP16M) product and notes about set up for some machines.
Some of the dry toner machines require a guard that was made for the Magnecote product and others require a good operator.
GENERAL PROCEDURES FOR ALL PRESSES:
If printing Press Mag for the first time, please follow the following general recommendations:
- Place normal paper or cardboard stock at bottom of trays to prevent sticking to drawer base
- Initially feed 5 to 10 sheets at a time
- Use by-pass trays, or those which give the most direct path to the print engine of the machine
- Remove sheets frequently from output tray









