NOT Pre Magnetized Paper IM-IP16U 13×19″ 100/box

Sale!

Standard Retail
$257.00 $225.00

9999 in stock

Added to Favorites

See your added products on My Favorites. Add as many as you need for ease of use.

Description

  • NOT pre-magnetized.
  • Requires magnetization post print.
  • 16 mil total thickness and photo quality PP print surface.
  • Will stack and cut perfectly on most machines and will not mark after cutting edges.

 

PRINTING INSTRUCTIONS:

Printing instructions will depend on the machine.
Litho is easy, Indigo is also easy.
The dry toner machines are all over the board.

The Canon machines have the hardest time running pre magnetized because they have a ferrous metal bottom to the fuser drawer and the Ricoh machines and KM are the easiest as they are all plastic and aluminum.

Please advise what machine your customer will be testing.

Below are a few that have been tested using the magnetized (IM-IP16M) product and notes about set up for some machines.

Some of the dry toner machines require a guard that was made for the Magnecote product and others require a good operator.

 

GENERAL PROCEDURES FOR ALL PRESSES:

If printing Press Mag for the first time, please follow the following general recommendations:

  1. Place normal paper or cardboard stock at bottom of trays to prevent sticking to drawer base
  2. Initially feed 5 to 10 sheets at a time
  3. Use by-pass trays, or those which give the most direct path to the print engine of the machine
  4. Remove sheets frequently from output tray

 

Additional information

Weight 0.00000000 lbs
Sub Qty

100/box

Product Type

NOT Pre magnetized

Size

13" x 19"

Thickness

16 mil

Select at least 2 products
to compare